Cruise Control for Kawasaki KLE650 Versys (2015 to 2021) servo
AUD $1,282.00
10% GST will be added in the cart for Australian orders only For countries other than Australia, import duty and taxes (Local Sales Tax, VAT or GST) are the customer’s responsibility.
All products come with a 12 month customer satisfaction guarantee
Click here to see the full product warranty information
- Description
- Additional Information
- Brochure and Installation Manuals
- Reviews (0)
- Shipping, Tariffs & Taxes
Description
MCCruise BikeCruise Electronic Cruise Control for Kawasaki KLE650 Versys (2015 to 2021)
Ride further and safer with the MCCruise electronic cruise control, designed specifically for the Kawasaki KLE650 Versys (2015 to 2021)
This precision speed control system enhances your riding experience by allowing you to focus on the road ahead, minimising the need to constantly check your speedometer.
Functionality
The MotorCycle Cruise control works like a car cruise control, it applies and releases the throttle to maintain the current speed when the SET button is pressed, typically within less than +/- 2kph under normal circumstances.
The current SET speed can be stepped up or down using the SET/ACCLERATE or RESUME/DECELERATE buttons, the standard speed change per press is 2kph, this speed change can be changed by the user to 1kph, 2kph, 1mph and 2mph per press. Or you can press and HOLD the SET or RESUME buttons to gently increase or decrease the speed, and when the button is released, the current speed is adopted as the set speed.
The accelerate or decelerate functions of the SET and RESUME buttons can be changed by the user to SET/DECELERATE and RESUME/ACCELERATE if desired.
Cruise Stop Functions
Both front and rear brake will disengage the cruise control instantly.
On all manual shift bikes, slipping the clutch will disengage the cruise control when the engine rpm rises or falls about 500 to 1000 rpm (15% variation). This amount of allowed rpm variation is selectable by the user from 10% to 50% if the user wants to change the amount of rpm variation allowed. The 15% variation will usually allow one gear shift up or down without disengaging the cruise control, two shifts up or down will disengage the cruise control.
On most models pulling the clutch in all the way will disengage the cruise control. This does not apply to some older BMW and Harley Davidson cruise control models.
The ON-OFF (power) button is also a COAST button, pressing this button when the cruise control is engaged will disengage the cruise control without turning it off.
Control Switches
All our cruise control switches have backlight buttons for night use and an indicator light showing power on and cruise control engaged or disengaged states.
All adjustments and settings for the cruise control are performed using the control switch buttons. No special tools are required.
Comfort and Relief
Ideal for riders who experience wrist, neck, or back pain, BikeCruise offers a solution to reduce strain, enabling long-distance rides with greater comfort. It’s especially beneficial for older riders or anyone seeking to maintain energy and focus throughout their journey, enhancing the overall riding experience by ensuring that both the journey and the destination are more enjoyable.
Benefits
- Enhanced Comfort: Reduce physical strain, especially during long rides.
- Optimized Focus: Allow riders to concentrate on the road, not their speed.
- Tailored to Your Ride: Customizable settings provide an individualized riding experience.
- Reduced Fatigue: Maintain energy throughout your journey, avoiding the need for constant throttle adjustments.
Installation Kit
Your BikeCruise kit includes:
- Electronic Control Unit
- Cruise Control Switch (with your choice of mounting options)
- Wiring Harness
- Detailed installation instructions specific to your Kawasaki KLE650 Versys (2015 to 2021)
The kit comes with everything you need for installation.
Selecting your Cruise Control Switch
MCCruise offers 2 x Control Switch options to choose from. Simply select your preference when adding the product to your cart.
- Standard MCCruise switch: Fully featured, weatherproof, and backlit for night use.
- Slim MCCruise switch: A sleeker, no additional cost option, allowing installation inboard of the clutch lever mount.
The installation process is straightforward, with clear, detailed instructions provided for setup, calibration, and testing.
Important Note: Ensure compatibility with your vehicle’s handlebars and make adjustments if needed. If your setup differs, contact us to explore alternative solutions or modifications.
Experience safety and precision with MCCruise BikeCruise — where comfort meets performance on every ride.
In order to fit the cruise control terminals on the bike's engine management ECU connectors must be backed out of the connector housing. A dressmaking pin (provided in the kit) or a small jeweller's screwdriver or a set of terminal extractor tools is required. This is a relatively easy job, but requires delicacy to ensure the terminals and connectors are not damaged.
These models have different engine ECUs depending on the model year. The connector type is the same, but have different number of wires and wire positions and colours are different. The brochure (link in the Brochure and Installation Manuals tab) describes how to find out which one you have, but this is NOT critical. The installation instructions covers all types. The other issue with the ECU change is the calibration for the speed signal is different. By default the cruise is supplied with the late model calibration, if your bike has the early model the speed signal must be re-calibrated which is done by putting the cruise in speed calibration mode (hold buttons while turning the ignition on) riding the bike at 70kph (44mph) and pressing the SET button. Instructions for this are provided in the installation manual.
Cruise control switch - there are three options to choose from (see photos):
- Slim MCCruise switch: Our new fully-featured and weatherproof switch which is a no cost option, and is fitted between the bike's switch block and the clutch lever mount. It has backlit buttons for night use, power (ON-OFF) indicator light and engage indicator light. The switch is 10mm (3/8") wide, so it may be necessary to slide the clutch lever assembly across to make space to mount the switch on the handlebar. Contact us for installation instructions if you wish to see how it is fitted.
- MCCruise switch: Our proven, fully-featured and weatherproof switch which comes standard with all of our products. Backlit buttons for night use, power (ON-OFF) indicator light and engage indicator light. This can be provided with a mounting bracket to mount it above the handlebar.
- The MCCruise switch can also be provided with a mounting bracket to mount it below the handlebar.
Non original LED brake lights and Brake Light Modulators (Flashers)
This bike has LED brake lights standard and the cruise control works with the O.E. (Original Equipment) brake lights as it is supplied. However, if you fit a different tail light or a Brake Light Modulator (flasher) you will have to order the The LED brake light harness modification with the cruise control. If you do not order this and you have fitted different brake lights or a brake light flasher, it is very likely the cruise control will not work. There is an alternative patch that can be fitted later if needed.
Brochure and Installation Manuals
Shipping, Tariffs & Taxes
Taxes, Duties & Customs Fees
Sales Tax, VAT, GST, import duties, or customs clearance fees will apply when goods are shipped to most countries. The amount will depend on your local regulations. In most cases, our products attract no duty or only minimal duty rates, though sales taxes and customs fees can vary significantly between countries.
To our knowledge, only the USA currently applies tariffs to our products of 12.5%, plus a couple of dollars customs clearance fee. The shipping carrier will contact you directly to arrange payment of any applicable taxes or fees on behalf of your country’s customs authority once your order is in transit.
Shipping Codes
Our products are generally shipped using one of the following HS (Harmonised System) or HTS (Harmonised Tariff Schedule) Codes:
- EU HS Code 8479.89.9790
- Canada HTS Code 8714.10.0000
- USA HTS Code 8714.10.0050 OR HST Code 8412.90.9005
- Rest of the world HTS Code 8714.10.0050
Contact your Customs organisation for more information
Related products
-
Cruise Control for Suzuki DL1000 V-Strom First Generation (to 2013) servo
AUD $1,282.00 AUD $1,294.00Price range: AUD $1,282.00 through AUD $1,294.00 -
Cruise Control for Suzuki DL650 V-Strom First Generation (2004 to 2011) servo
AUD $1,282.00 AUD $1,294.00Price range: AUD $1,282.00 through AUD $1,294.00 -
Cruise Control for Kawasaki VN1600 Vulcan Nomad & Classic Vac_Upgrade
AUD $1,364.00 AUD $1,376.00Price range: AUD $1,364.00 through AUD $1,376.00 -
Cruise Control for Triumph Sprint ST1050 Vac_Upgrade
AUD $1,364.00
Reviews
There are no reviews yet.