Cruise Control for Harley-Davidson PRE-CANBUS FLS/FXS SOFTAIL Range (2007-2011) servo

The cruise control connects to the bike's throttle using the cruise control fittings that are part of the throttle body. These fittings are there for use on other HD models that have factory cruise control. Our cruise control uses these fitting on the throttle body. If your bike has been modified check that these fittings are still there. See the brochure in the link below for details and a photo of the fitting on the throttle body.

This MCCruise Softail kit fit all Softails from 2007 to 2011 fitted with Twin Cam 96 motor including:

• SOFTAIL STANDARD
• FAT BOY
• FAT BOY LO
• SOFTAIL DELUXE
• HERITAGE SOFTAIL CLASSIC
• SOFTAIL SLIM
• BREAKOUT
  (Some models have the ECM under the mudguard [fender]. This may require significant disassembly to fit MCCruise)

The following information is required to assist us in delivering the perfect kit for your bike:

There are FOUR key differences between Harley-Davidson motorcycles which are important from the cruise control perspective:

1. In order to identify if your bike has CAN-BUS or not check the wire colours on the rear brake light switch. See the photos above to assist with identifying the rear brake light switch.

• The wires to the foot (rear) brake switch on Pre-CAN-BUS models are orange/white (orange with a white trace) and red/yellow. The EARLY types do not have CANBUS & BODY CONTROL MODULE, only an ENGINE CONTROL MODULE.
• The wires to the foot brake switch on later bikes with CAN-BUS wiring harnesses are black and blue/green (blue with a green trace). These LATER types HAVE CANBUS & AN ENGINE CONTROL MODULE & A BODY CONTROL MODULE)
  
• This cruise control kit is for Pre-CAN-BUS models. A different cruise control kit is requited for the CAN-BUS models.

2. We need to know the switch wire length required. This HD FX & FL Control Switch Wire Length document provides all the information needed for you to tell us what we need to know about the length of cruise control switch wires to supply in the kit for your bike. We also need to know whether the switch wires will be run INSIDE the handlebars (1" bars or bigger, only) or OUTSIDE the handlebars.

3. Please select above the cart button whether your bike has engine crash bars.  You can see this becomes important because the cruise computer mounts on the frame on the same bolt that is used for engine bars. See the Brochure for details on computer mounting with and without engine bars. See MCCruise review in Heavy Duty Magazine for more information. Please note that the speed sensor shown in this article is no longer required.

4. Please specify the year and model of your bike when ordering - in the comments section of the cart.

Please decide whether you need to buy roll-crimpers and purchase accordingly. We recommend proper roll-crimpers are used to do a professional job and create very reliable connections.
Download the Utilux Instructions:

Documentation