Cruise Control for KTM 390 Adventure 2020 TBW

(10% GST will be added in the cart for Australian orders only)

The Motorcycle Cruise Control unit is adapted specifically for this vehicle, with a custom made and fully plug and play wiring harness, using genuine connectors and terminals as used by the manufacturer. There is no wire splicing or any other permanent changes made to your bike.

The motorcycle cruise installation instructions and specific cruise manuals and supporting documents can be found here.

Cruise control switch mounting - There are three options to choose from. The Slim Switch attached directly to the handlebar. The other two MCCruise switches have mounting brackets that attach on the bike's mirror mount. EMAIL US if you have removed the mirrors:

1. New Slim MCCruise switch: Our new fully-featured and weatherproof switch is fitted between the bike's switch block and the clutch lever mount. Backlit buttons for night use, power (ON-OFF) indicator light and engage indicator light. The switch is 10mm (3/8") wide, so it may be necessary to slide the clutch lever assembly across to make space to mount the switch on the handlebar. Contact us for installation instructions if you wish to see how it is fitted.
   
   
2. Our original control switch using a lo above bar switch mounting bracket - puts the switch above the handlebar close to the bike's switch block.
   
   
3. Our original control switch using a hi above bar mounting bracket - puts the switch above the handlebar with a finger width clearance above the bike's switch block.
   
   

Aftermarket (not Original Equipment) LED brake/tail lights and Brake Light Modulators.

We are finding that quite a lot of owners are replacing the original tail light with aftermarket (accessory) LED tail lights. The cruise works with the OE LED tail light, but in most cases it needs an addition to the cruise control wiring harness to operate with an aftermarket LED tail light. If you have fitted or possibly intend to fit a different LED tail light or a brake light modulator to the bike, purchase this LED-brake-light-harness-modification with the cruise control. This modification will work perfectly with the original light and will make sure that it will also work with a different brake/tail light system.

Diagnostic Dongle for KTM motorcycles

Many KTM riders install CAN-BUS fuel or off-road dongles to the CAN-BUS diagnostic plug on their bikes. The MCCruise also taps into this plug, so to have two connections, a pass-through patch harness is required to support accessories downstream of the MCCruise connection.To facilitate this process, MCCruise makes a specific connector for KTM motorcycles.

If your bike has any sort of CAN-BUS dongle connected to the CAN-BUS diagnostic plug, please ensure when buying your new MCCruise you select the Dongle Connection Included button, rather than buying this accessory later. Buying at the same time as buying your cruise control minimizes shipping costs for customers.

Accessory/Aftermarket LED brake/tail lights

Many KTM riders install a different LED tail light to their bikes. The cruise control works with the original KTM tail light, but we have found that in most cases we have to make a minor modification to the wiring harness if different tail light is fitted. This modification is an LED Harness Modification and MUST be purchased with the cruise control if any other LED tail/brake light is fitted or is going to be fitted to the bike at a later time. Click here to select the LED Harness Modification.

Download the Brochure:

The electronic cruise control unit is shipped worldwide with all parts, parts list and detailed installation instructions for this kit.

Download the Parts List: