Cruise Control for KTM 690 Enduro R from 2021 Euro 5 TBW

(10% GST will be added in the cart for Australian orders only)

This cruise control is for the new Euro 5 spec KTM690 and will connect to the Euro 5 OBDII diagnostic connector.  Photos of the diagnostic connectors can be selected in the photos above.  These connectors are under the seat, near the negative terminal of the battery. If your bike has the earlier diagnostic connector do NOT purchase this kit, order the 2019 Pre Euro 5 KTM690 Enduro cruise control kit.  The cruise control kits are essentially identical in all other respects.

It appears that most markets moved to the Euro 5 connector in the 2021 model year, but we think that North America has stayed with the previous white ODBII connector.

The Motorcycle Cruise Control unit is adapted specifically for this vehicle, with a custom made and fully plug and play wiring harness, using genuine connectors and terminals as used by the manufacturer. There is no wire splicing or any other permanent changes made to your bike.

The motorcycle cruise installation instructions and specific cruise manuals and supporting documents can be found here.

Cruise control switch mounting bracket - the MCCruise bracket uses the bike's original mirror mount (EMAIL US if you have removed the mirrors), and there are four options to choose from (see photos):

1. New Slim MCCruise switch: Our new fully-featured and weatherproof switch is fitted between the bike's switch block and the clutch lever mount.  Backlit buttons for night use, power (ON-OFF) indicator light and engage indicator light.  The switch is 10mm (3/8") wide, so it may be necessary to slide the clutch lever assembly across to make space to mount the switch on the handlebar.  Contact us for installation instructions if you wish to see how it is fitted.
   
   
2. Our original control switch using an above bar switch mounting bracket - puts the switch above the handlebar.
   
   
3. Our original control switch using a below bar mounting bracket - puts the switch below the handlebar. Check that there is at least 25mm (1") clearance in a straight line below the bike's switch gear when the handlebars are turned full left.

Long Range Fuel Tanks

Some owners fit a long range fuel tanks to their bike.  We developed an alternative mounting location for the Husqvarna 701LR as the computer cannot be mounted in the usual location in some cases with a long range fuel tank.  This mounting also fits the KTM690 and is available if required.  Contact us for more information.  There is a photo showing this alternative mounting in the downloadable brochure and also on the web pages for the Husqvarna 701 models.

Diagnostic Dongle for KTM motorcycles

Many KTM riders install CAN-BUS fuel or off-road dongles to the CAN-BUS diagnostic plug on their bikes. The MCCruise also taps into this plug, so to have two connections, a pass-through patch harness is required to support accessories downstream of the MCCruise connection. To facilitate this process, MCCruise makes a specific connector for KTM motorcycles.

If your bike has any sort of CAN-BUS dongle connected to the CAN-BUS diagnostic plug, please ensure when buying your new MCCruise you select the Dongle Connection Included button, rather than buying this accessory later. Buying at the same time as buying your cruise control minimizes shipping costs for customers.

Accessory/Aftermarket LED brake/tail lights and brake light modulators

Many KTM riders install a different LED tail light or complete fuel tank/tail section to their bikes.  The cruise control works with the original KTM tail light, but we have found that in most cases we have to make a minor modification to the wiring harness if different tail light is fitted or is a brake light modulator is fitted.  This modification is an LED Harness Modification and MUST be purchased with the cruise control if any other LED tail/brake light is fitted or is going to be fitted to the bike at a later time. Click here to select the LED Harness Modification.

FIM Compliant 'Rally' brake/tail light

We have some customers who fit an FIM Compliant LED brake/tail light to be able to participate in various 'Rally' events.  This light is usually fitted in addition to the normal brake/tail light. This light will prevent the cruise control engaging because it interferes with the cruise control's brake detection.  In order to make this work with the cruise control a blocking diode must be fitted to the brake light power wire to this light. Click here to see an example of this type of light. Contact us for more info about this. 

Download the Brochure:

The electronic cruise control unit is shipped worldwide with all parts, parts list and detailed installation instructions for this kit.

Download the Parts List: